Which Type Of Water Purifiers Remove Fluoride?

While water purification systems remove many things that inhibit the growth of bacteria and toxins, they are not effective in completely reducing the water to H20. With that said, there are water purification systems that are more thorough. If you are concerned about the amount of fluoride that may be in the system, not every water purification system has the capacity to get rid of this element; however, there are some that will remove the fluoride from the system better than others. It’s difficult to say that these systems completely obliterate every particle, but they have been effective at dramatically reducing the amount. Here are some that will work for this purpose:

What Won’t Take Care Of The Job

The most common type of water filtration used for in-home use is activated carbon filters. Activated carbon filters are considered the best for removing unwanted elements. While they do a good job at it, this function doesn’t have the capacity to remove fluoride from water. Some who wish to buy water filters do not care if this function is present. In this case, this type of module is perfectly fine. If you are looking for one that can perform this procedure, you should consider the following:

Reverse Osmosis

Reverse osmosis is done by putting pressure on the water molecules. When pressure is put on water molecules, they are forced to through a semipermeable membrane. It’s sort of like using a strainer after boiling pasta. The semipermeable membrane only allows pure water to flow through it, as it is only able to accept water through its membrane. This destroys any elements that are not a part of the H20. The contaminants are allow left behind, this leaves almost pure water.

Strong Base Anion Exchange

The function of this device is largely complicated. The best way to sum it up is that it ammonium groups are added into the water that helps purify it. This exchanges any harmful toxins in the water to make it pure.


This process separates modules through selective boiling. The process is to produce condensation. Condensation is the way clouds are formed (you probably already knew that). When condensation comes from the sea, the salt isn’t a component of the clouds that come with it. Distillation works in much the same way. Only the components of water are collected into this man-made cloud. While this is much done to the same effect, more research needs to be conducted to prove its effectiveness.

There Are Several Options When It Comes To Modules

Some only wish to purify certain water in the home, while others wish to purify the entirety of the models in the home. There are several modules of water filters that will suit your needs:

-A Pitcher

For those who would like to drink water that doesn’t contain fluoride, this is an extremely efficient option. The water is instantly purified as it pours. You don’t have to perform another step. Tap water is instantly purified to the point where it contains extremely low levels of fluoride and other contaminants. There are a lot of water filter pitchers that you can choose from.

-Under Counter

Under counter, purification keeps your unit out of view. This is a great option for those who do not wish to have their machine visible. Under counter, machines have the ability to hold much higher amounts of water. Many of these models are more expensive than the pitcher option; however, they have a higher ability to purify the water as there are more components that work to purify the water.

-Bigger Systems

There are many bigger systems that filtrate water for the entire home. These water filters are the most expensive option; however, they have the ability to remove all fluoride from the system for every drop of water you use in your home. This option allows you to not bathe in fluoride-containing water. It can be used for outside pools and jacuzzis. What we leave on our skin can be sucked up into the bloodstream. That’s why those who use draw on themselves can eventually be poisoned from the contents in the ink.

Consider All Your Options

There are a variety of ways to ensure that your water is completely free of components that you are wary of. Although those who run the department of sanitation give little care of what components you would not like to have in your water, you are given the ability to control it with filtration systems. This hasn’t always been an option for households. Water filtrations are a fairly modern invention.

We are all concerned about money and have different budgets. The types of water filtration systems are vast enough to allow anyone on a budget to find one that works for them. If you’re interested in cleaner, fluoride-free water, you have more options than just buying water bottles.

Tips For Improving The Taste Of Water

Have you ever noticed that the water from your home’s tap tastes different than the water you drink out of a bottle? Unfortunately, there are regions around the country where the tap water does not taste the best. However, you no longer have to deal with bad tasting water, and there are very simple tips and solutions that you can try to improve the taste of the water you drink.

The truth is that there are many chemicals that are used to treat tap water. These chemicals help to ensure that the water is safe to drink. Sadly, it is these chemicals that also alter the way tap water tastes.

Of course, you can not physically see a difference in the tap water. For example, if the water was brown, there is probably no chance you would drink it no matter what it tasted like.

Every municipality in the country uses a complex and unique treatment system to make tap water suitable to drink. This means that it can become very difficult to try to find out the root causes as to why tap water can taste so different from one part of the country to the next.

According to the Environmental Protection Agency (EPA), that are over 15 percent of households in the United States that use well water. This means that over 85 percent of the rest of the country’s population uses water from a municipal system.

There is also another statistic that is associated with drinking water. Most people are simply not drinking enough of it. Some reports state that 43% of Americans are dehydrated, while other reports say 80% of us are dehydrated. Either way, the takeaway from these reports is crystal clear. People should be drinking a lot more water.

So, if you are looking for a way to improve the taste of the water you drink, but you also want to save money on buying bottled water, the following tips will not only provide you with great tasting water, but you will also save money and help the environment at the same time.

  • Use A Water Filter

Water filters can transform nasty tap water into delicious, clean and crisp drinking water. There are a variety of water filters on the market, and most manufacturers of these filters recommend that you change the filter at least twice a year (every six months).

One of the biggest culprits that affect how tap water tastes are chlorine. This chemical not only affects the smell of tap water, but it can also affect the taste.

It is the smell that is instantly recognizable when you are near a swimming pool, and it is a very effective germ killer. This is the primary reason it is the chemical is used in tap water. Unfortunately, it can seriously change the way tap water tastes.

If you want to remove the chlorine taste from your water, you will need to buy a carbon filter.

You can also purchase a water filter jug, or have a filter installed under one of the sinks in your home. There is even the option of installing a complete water filtering system for your entire home.

  • Add Artificial Flavor

Although this tip will not eliminate your exposure to any chemicals, and it is probably an option that you will not want to choose all of the time. However, you can add some flavors to your water. Some people add syrup, and it is usually enough to overpower the chlorine taste.

You can choose any type of flavor that you prefer, and you will not need to use too much to improve the taste of your drinking water.

  • Flavored And Unsweetened

There is also the option of adding fruit, herbs, veggies, and spices to your water if you prefer to avoid artificial flavorings and sugars. You can use the produce, herbs, and spices that you have in your kitchen right now and create delicious drinking water. Almost any type of combination you can imagine will result in healthy and amazing hydration you can enjoy during the day.

In fact, you may be pleasantly surprised how a small piece of rosemary or a single grapefruit slice can add so much flavor to an ordinary glass of water. Even adding flavors like cilantro and ginger will create a healthy beverage that can compete with anything artificial and sweetened.

  • Use Juice

Another option is to add fruit juice to your drinking water. Even though you can use any type of fruit juice that you want, juices from fruits that have tart flavors can make your drinking water even more delicious. Some of these tart fruits are:

  • Cranberries
  • Grapes
  • Apples
  • Pomegranates

Choose juices that do not have any added sugars, and remember that fruit juices do not only taste good. These juices have many vitamins, minerals, and antioxidants that also offer many health benefits as well.

  • Add Some Bubbles

There are some people who prefer to drink sparkling water as opposed to still water. If you are not inspired by the plain water that is coming out of your tap, you can always substitute it for some natural effervescent mineral water. This type of drinking water also includes the additional benefit of important minerals.

You can also drink natural seltzer flavored water. If you enjoy drinking this type of water, you may want to consider investing in a seltzer maker that you can use in your home.

  • Use Ice

Some people say that tap water tastes better to them when they put ice in it or they allow it to get cold in the freezer. If you feel the same way, you can use flavored ice cubes to really enhance the taste of your water.

You can experiment with flavors such as:

  • Mint
  • Cucumber
  • Fruit

All you will need to do is choose the flavoring of your choice, chop it up and add it to an ice tray full of water. Allow the ice tray to freeze, and place the ice cubes in your glass when you are ready to drink some water.

Drinking water should not be considered a task to complete. If you want to increase your consumption and enjoyment of this natural beverage, you can use the above-mentioned tips and tricks to improve the taste of the water you drink.

How Charcoal Water Filters Work

To some, the concept of charcoal for water purification doesn’t make sense. Charcoal is a dirty substance. Its most common purpose is to grill meat. It then has to be scrubbed off the grill. Few consider another function of charcoal.

You may have noticed charcoal face masks hitting the market. Activated charcoal is extremely effective at pulling particles and toxins away from a surface. People have been looking for more purification systems that are natural. Some have even turned to drink charcoal water. Activated charcoal can cleanse the whole system. Those who drink charcoal water have seen an increase in energy, mood, and skin. Charcoal also has the ability to cleanse water.

How Does This Happen?

It isn’t The Same as the charcoal used to grill meat. The difference between charcoal that’s used in a grill and the type that’s used to purify is that the charcoal used to purify has been activated. If the charcoal’s been activated, it has the ability to absorb organic and non-organic material.

Charcoal activation is done by superheating the charcoal without the presence of oxygen. The temperature setting is 1000F. Once the charcoal has been heated, it is chemically treated. The chemicals used to treat charcoal are argon and nitrogen. Then, the charcoal is heated at a high temperature again. Steam is then added to create a porous structure. Reducing the charcoal into a porous structure is essential to make it suitable for water filtration.

How The Adsorption Works

When the think of absorption, it sounds like pulling something physically into another thing. The process of purifying with charcoal is done by a similar process, known as adsorption. They are often confused. Adsorption works by pulling impurities chemically. The pores in activated charcoal increase their ability for adsorption by reducing the surface area up to 2000 sq meters per gram. This drastically improves its ability to do the job.

Just As Effective As A Synthetic Solution

Many water purification practices introduce a new chemical to counteract the ones that are harmful. A synthetic solution. Charcoal is just as effective at removing many of the chemicals present in a natural way. Charcoal can pull organic compounds that may be present as well as chemicals like chlorine.

Activated charcoal differs in other types of filtration as it does not remove the salts and minerals from the water. Reverse osmosis removes everything. The salts and minerals in water are vital to the functioning of the body. Salt helps replace electrolytes lost in sweat.

The Effect Is Simple

Many students learn in chemistry class that carbon attracts carbon-based organic particles. This is the same process that carbon water filter uses. While this system is an excellent choice for purifying water, more materials are left behind and pass through the filter. Charcoal filters are an excellent option for individuals who would like water that retains more of its natural contents.

When It’s Time For Replacement

The charcoal in filters needs to be replaced since all the pores will become full eventually. Luckily, this is extremely easy. It’s also not very expensive for those who are frugal-minded. This makes charcoal fillers a popular option.

Let’s Look At The Benefits

1. All That’s Healthy Remains

Too many are using filters that remove minerals and salts. Salts and minerals aren’t just important for the health effects! They also add taste. While some like water that has no taste to it, those who love the natural taste of the water will still receive it.

2. It’s Super Cheap!

Companies that produce charcoal filters can do so at a cheap cost. Most water filtration systems are very expensive to make. That’s what creates the hefty price tag.

3. It Actually Makes The Water Healthier

Most water filter devices do not add components to the water which makes it healthier. Charcoal filtration filters add important nutrients like calcium, magnesium, and iron. This improves water quality and adds the nutrients most people don’t give enough of.

4. Improves Flavor

There’s a reason why tap water has a metallic taste to it. Chlorine is often added to tap water to kill dangerous bacteria and pathogens. Sanitation departments have to add it to protect the health of the public. Those who wish to avoid this taste often buy bottled water. These bottles go directly into landfills, which adds an unnecessary amount of damage to this earth we all have to share.

Charcoal has the power to absorb chlorine. This gets rid of its nasty taste. Chlorine is also responsible for creating the funny odor that comes with tap water in some areas. Once chlorine is absorbed, the nasty odor goes away.

5. They’re Easy To Maintain

Other devices are sometimes difficult to maintain. They can even be expensive to maintain. Charcoal filters only need to be replaced every six months. This largely depends on the amount of water processed through the system. Those who process more water may have to do so every three months. It’s easy to tell when a filter has to be replaced. The taste of water that isn’t filtered will be produced and past by the filter.

Is This Your Solution For Water Filtration?

For those looking for an option that allows them to receive clean water, but don’t want to sacrifice the taste and health benefits that water contains, a charcoal filtration is an excellent option. It’s natural, effective and perfectly safe! Enjoy a natural alternative.

How Long Does Filtered Water Last And What’s The Protocol?

People have long stored water in sheds, bunkers, closets, etc. in an effort to prepare for emergencies. Bottled water or filtered water can be stored for years, right? Wrong. While it will still be good, meaning it won’t expire, the water isn’t going to taste great after a mere period of 6 months. Of course, you’re not wanting to keep your filtered water for 6 months, are you?

Most people looking up this question simply want to know if they can keep filtered water around for a few weeks without having to worry about it tasting bad or becoming contaminated. You have your answer because it takes about 6 months before the water no longer has its refreshing taste. Yet you want to be sure that you do make a habit of using up your filtered water in a timely manner.

That said, when it comes to your emergency water supply, you should switch it out every 6 months. You can perhaps wait longer than that, and many people do. Yet that is the Department of Homeland Security’s recommendation. Given the fact, however, that the water is going to be used for emergencies, you’re not going to be such a stickler for taste.

It would still be nice to know that the water you have stored for emergencies is actually going to be refreshing though. And when it comes to the filtered water you keep in your refrigerator, let’s look at things a little differently. If you’re wondering how long filtered water lasts before it expires, the best thing to do is drink more water.

I know, we all need to drink more water, right? It’s not something we always think about, and we’re often not at the home to get a glass and drink up. When you are home, think about your beverage choices and opt to drink more water. That will be the best possible solution.

It should also be mentioned that chlorine in water starts to evaporate over a period of time. When that happens, it’s easier for your water to get contaminated. Naturally, there are things you can do to decontaminate the water once again. But the best thing to do is to drink up before you have to worry about that.

Managing filtered water in the home does take some work. It’s a little different than simply going to the tap and filling up a glass with water. Yet you can get a filter for your faucet so that you don’t have to store filtered water.

Of course, you want to store filtered water for emergencies, and now you know how long it lasts. After 6 months, you are going to need to go ahead and use your filtration system to store more water for emergencies. Otherwise, you’re going to have some nasty tasting water if you ever have to use it for any reason. And let’s hope that the water just sits there until you have to refill it because no one wants to experience an emergency situation.

A Water Filtration System For An Apartment Building

If you are looking to move into an apartment, you are likely going to be concerned with the filtration being offered. Unfortunately, with an apartment, you are likely going to be limited to certain options. Therefore, you need to find something suitable. Below, we will be going over some of the different things that you could opt for as a tenant and as an owner.

A Water Filtration System For An Apartment Building:

  • Jog Filters

The easiest and most convenient way to get the filtration that you need would be to utilize jug filters. By using jugs, you will be able to fill up water whenever you want it or need it. To use one of these filters, you simply fill up the water and place it in the fridge. From there, you can pour the water and drink it whenever you want. Using this type of filter is going to offer suitable performance as long as you are willing to change the filter regularly. The only downside is that the jug will take up quite a bit of space in your fridge and you will need to wait for the water to get filtered.

  • Under-the-Sink Filtration Systems

This is another option that you have available when you are looking to filter water in your apartment building. By choosing an under the sink installation, you will be able to get a much more complete filtration system that offers multiple stages. Therefore, you will be able to remove more contaminants than you would get from a simple jug or pitcher filter. However, this filtration system will cost a lot more than a simple pitcher system which might push it out of your price range. However, if you have the budget for it, this is likely your best option.

  • Over The Sink or Countertop Filtration System

This is going to be for those that want an easier installation than an underneath option. These filtration systems are usually very small and somewhat stylish. Therefore, they won’t stick out like a sore thumb. However, they are going to take up countertop space, but they will offer equal performance as some of the more expensive options that you could opt for under your sink. They typically do not handle the same volume. Therefore, you will need to replace the filter more often in this type of system.

For Owners:

  • Commercial Filtration Systems

For apartment building owners looking to filter their entire building, they will require commercial filtration systems. These systems are designed to be used in a commercial setting where high volume will be needed. They are capable of performing with minimal maintenance required.

Finding The Right System:

  • Price

The main thing that is likely to dictate your purchasing decision would be the total price of the system. Finding a system that is available at the best price is key. You want to find one that is not only a good price but one that is available at a price that fits within your budget. That way, you can get one that is not going to force you to go out of a comfortable price range for your budget.

  • Reliability

Another thing that you will need to do is focus on the reliability and the production that you will be able to get out of it. For instance, if you will require a commercial filtration system for an entire apartment building, you will want to get one that produces millions of gallons. Whereas, if you are looking for basic systems that produce enough for a sink, you will be looking at an option that produces much less.

  • Size and Type

The size and type are other factors that will dictate your purchasing decision. As an apartment renter, you might be stuck choosing between an under the sink filtration system or one that sits on your countertop. You will likely base your decision on the overall size of the system that is to be installed and your budget.

Overall, there are many complications that present itself in an apartment building setting. An owner or landlord is unlikely to allow you to install a complex filtration system. Because of this, as a renter, you will be required to use something that involves a simple installation and one that is not going to be difficult to remove. Luckily, there are plenty of options that you can choose from when you are looking to identify the right filtration system. By following the tips above, you should be able to choose the ideal option for your needs. For those that own the building and need a filtration system installed, your best option is a commercial filtration system that utilizes reverse osmosis. That way, you will be able to get a system that offers a maximum rejection of impurities that can keep all of the tenants in your building safe, healthy, and happy with the water that they have access to.